View AZ832-2C-9DSE_1215158.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AZ832
POLARIZED DIP RELAY SINGLE SIDE STABLE
FEATURES Low profile for compact board spacing DC coils to 48 VDC High sensitivity, 96 mW pickup Life expectancy to 20 million operations High switching capacity, 150 W, 250 VA Fits standard 16 pin IC socket Epoxy sealed for automatic wave soldering and cleaning * Meets FCC Part 68.302 1500 V lightning surge * Meets FCC Part 68.304 1000 V dielectric * UL file E43203; CSA file LR702225 CONTACTS
Arrangement Ratings DPDT (2 Form C) Bifurcated crossbar contacts Resistive load: Max. switched power: 150 W or 250 VA Max. switched current: 5 A Max. switched voltage: 250 VDC or 250 VAC
*Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory.
* * * * * * *
GENERAL DATA
Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Bounce (typical) Dielectric Strength (at sea level) Minimum operations 2 x 107 1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC 2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC 3 ms at nominal coil voltage 2 ms at nominal coil voltage (with no coil suppression) 3 ms 1500 Vrms contact to coil 1000 Vrms between contact sets 1000 Vrms across contacts Meets FCC Part 68.302 lightning surge Meets FCC Part 68.304 V dielectric 1000 megohms min. at 20C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40C (-40F) to 85C (185F) -40C (-40F) to 115C (239F) 50 g at 10-500 Hz 50 g P.B.T. polyester Tinned copper alloy, P.C. 270C (518F) 5 seconds 80C (176F) 30 seconds 5 grams
Rated Load UL/CSA Material
2 A at 25 VDC resistive 1 A at 120 VAC resistive Gold plated silver against palladium silver. Gold plated palladium silver against palladium silver (Suffix "A") < 50 milliohms initially
Insulation Resistance Dropout
Resistance
COIL
Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Standard coil: 128 mW Sensitive coil: 96 mW 0.9 W at 20C (68F) Max. 115C (239F)
Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals
NOTES
All values at 20C (68F). Relay may pull in with less than "Must Operate" value. Relay has fixed coil polarity. For complete isolation between the relay's magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays. 5. Relay adjustment may be affected if undue pressure is exerted on relay case. 6. Specifications subject to change without notice. 1. 2. 3. 4.
Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight
ZETTLER
electronics
2000--11-17
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
AZ832
Nominal Coil VDC 3 5 6 9 12 24 48
RELAY ORDERING DATA
STANDARD COIL COIL SPECIFICATIONS
Max. Continuous VDC 6.4 10.6 12.7 19.1 25.5 50.9 101.8 Coil Resistance 10% 45.0 125 180 405 720 2,880 11,520 Must Operate VDC 2.4 4.0 4.8 7.2 9.6 19.2 38.4
ORDER NUMBER*
AZ832-2C-3DE** AZ832-2C-5DE AZ832-2C-6DE AZ832-2C-9DE AZ832-2C-12DE AZ832-2C-24DE AZ832-2C-48DE
NON-SENSITIVE COIL COIL SPECIFICATIONS
Nominal Coil VDC 3 5 6 12 24 48 Max. Continuous VDC 5.7 9.2 11.0 23.2 44.6 93.7 Coil Resistance 10% 36 95 150 600 2210 9750 Must Operate VDC 2.25 3.75 4.5 9.0 18.0 36.0
ORDER NUMBER*
AZ832-2C-3DME** AZ832-2C-5DME AZ832-2C-6DME AZ832-2C-12DME AZ832-2C-24DME AZ832-2C-48DME
SENSITIVE COIL COIL SPECIFICATIONS
Nominal Coil VDC 5 6 9 12 Max. Continuous VDC 12.3 14.5 21 29 Coil Resistance 10% 167 240 540 960 Must Operate VDC 4.0 4.8 7.2 9.6
ORDER NUMBER*
AZ832-2C-5DSE AZ832-2C-6DSE AZ832-2C-9DSE AZ832-2C-12DSE
24 57 3840 19.2 AZ832-2C-24DSE *Add suffix "A" for gold plated palladium silver against palladium silver contact material. **3 V coils not UL/CSA approved
MECHANICAL DATA
MECHANICAL DATA
.048 [1.21] .795 MAX. [20.20] .394 MAX. [10.00]
1
PC BOARD LAYOUT
.300 [7.62]
.047 [1.19]
4
6
8
.026 [0.66]
.419 MAX. [10.65]
.300 [7.62]
16 13 11 9
.118 [3.00]
8 x o.039 [o1.0] .048 [1.21] 8x .024.005 [0.610.12] 8x .012.005 [0.300.12]
2x .200 [5.08]
.024 REF. [0.61]
WIRING DIAGRAM
1 4 6 8
.012 REF. [0.30]
.300 [7.62]
+ 16 13 11 9
(WATCH FOR POLARITY) VIEWED TOWARD TERMINALS
ZETTLER
Dimensions in inches with metric equivalents in parentheses. Tolerance: .010"
electronics
2000--11-17
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700

▲Up To Search▲

Price & Availability of AZ832-2C-9DSE

	To Download AZ832-2C-9DSE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .